Installation

NatureCool pads are installed side-by-side with no intermittent joints or framing. Maximum size is: 24" deep x 24" wide x 72" high. The pads can be cut down to 4", 6", 8", 12" or 18" in depth and to any height in multiples of 12" up to 72" high. For taller pad walls, the media can be stacked to a height of 12', using intermediate supports along the horizontal joints. Water flow is based on the depth of the pad. NatureCool pads require 1.5 gallons per minute per square foot of horizontal surface area. For applications that require distribution pads, they are available in 2" and 3" thicknesses.

Diverse Application of NatureCool Pads

The evaporative cooling technology benefits many industries. Greenhouses are able to maintain climate control even in the hottest, sunniest months. Gas turbine generators utilize the cooler and denser air to increase output by as much as 24% when it is hottest and power demands are the greatest. NatureCool can increase quality and decrease cost in the livestock confinement industry. Humans greatly benefit from evaporative cooling when homes and buildings are cooled in the summer and humidified in the winter.

The Benefits of Evaporative Cooling

• Operating costs are low.
• Low initial equipment costs.
• Does not use environmentally harmful refrigerants.
• Minimal maintenance.
• Consistent and predictable performance throughout life-span of pads.
• Media acts as a self-cleaning air filter.
• Can be used in all geographical areas.