Desiccant Dehumidification  Passive Dehumidification  Energy Recovery  Evaporative Cooling  Recore
CEL PAD SPECIFICATIONS

Nature Cool™ Cel-Pad Specifications

The media shall be cellulose evaporative cooling and humidification media, as provided by Nature Cool™ and shall be corrugated with a 5mm or 7mm flute height as per product type, in a cross-fluted configuration to ensure a self cleaning operation. Media shall be constructed from a self-supporting, impregnated 100 gram basis weight cellulose substrate, to give high absorbency and protection against the degradation effects of water and air. The media shall be engineered to assure even air flow through flutes arranged at 15, 45 or a combination angle thereof to horizontal. The cross-fluted design shall be both self cleaning and prevent biological and clogging degradation.

The saturation effectiveness and media depth available shall be in accordance with what is listed on the appropriate performance curve.

A 1” - 3” thick water distribution pad shall be optionally available to ensure even water distribution over the top of the media. It shall be constructed of the same material as that of the evaporative cooling and humidification media. A synthetic coating shall be applied to the top and bottom edges of the distribution pad in order to reduce water erosion and aid in cleaning.

As required, the media shall include a synthetic coating applied to the air entering side of the pad. It shall have a depth of approximately one-half inch.

The manufacturer shall supply a one (1) year warranty that the media will be free from defects in materials and workmanship commencing from the date of shipment. This is provided that the media is installed and maintained according to the manufacturer’s written instructions. This includes but is not limited to algae control, water chemistry, and proper installation.

Media manufactured from random pattern materials such as aspen wood, horse hair, glass wool, or other synthetic materials shall not be accepted.

Cel Pad 5 specifications

Cel Pad 7 specifications


GLAS PAD SPECIFICATIONS

Nature Cool™ Glas-Pad Specifications

The media shall be glass fiber evaporative cooling and humidification media, as provided by Nature Cool™ and shall be corrugated with a 5mm or 7mm flute height as per product type, in a cross-fluted configuration to ensure a self cleaning operation. Media shall be constructed from a self-supporting, impregnated 50 gram basis weight glass fiber substrate, to give high absorbency and protection against the degradation effects of water and air. The media shall be engineered to assure even air flow through flutes arranged at 15, 45 or a combination angle thereof to horizontal. The cross-fluted design shall be both self cleaning and prevent biological and clogging degradation.

The saturation effectiveness and media depth available shall be in accordance with what is listed on the appropriate performance curve.

A 1”- 3” thick water distribution pad shall be optionally available to ensure even water distribution over the top of the media. It shall be constructed of the same material as that of the evaporative cooling and humidification media. A synthetic coating shall be applied to the top and bottom edges of the distribution pad in order to reduce water erosion and aid in cleaning.

As required, the media shall include a synthetic coating applied to the air entering side of the pad. It shall have a depth of approximately one-half inch.

The supplier shall supply a two (2) year warranty that the media will be free from defects in materials and workmanship commencing from the date of shipment. This is provided that the media is installed and maintained according to the manufacturer’s written instructions. This includes but is not limited to algae control, water chemistry, and proper installation.

Media manufactured from random pattern materials such as aspen wood, horse hair, glass wool, or other synthetic materials shall not be accepted.

Glas Pad Specifications Mobile

NatureCool

Desiccant DehumidificationPassive Dehumidification TabEnergy Recovery Evaporative Cooling Recore

Your One Source For Rotary Heat, Mass Transfer & Evaporative Cooling Products

 CEL PAD SPECIFICATIONS

Nature Cool™ Cel-Pad Specifications

The media shall be cellulose evaporative cooling and humidification media, as provided by Nature Cool™ and shall be corrugated with a 5mm or 7mm flute height as per product type, in a cross-fluted configuration to ensure a self cleaning operation. Media shall be constructed from a self-supporting, impregnated 100 gram basis weight cellulose substrate, to give high absorbency and protection against the degradation effects of water and air. The media shall be engineered to assure even air flow through flutes arranged at 15, 45 or a combination angle thereof to horizontal. The cross-fluted design shall be both self cleaning and prevent biological and clogging degradation.

The saturation effectiveness and media depth available shall be in accordance with what is listed on the appropriate performance curve.

A 1” - 3” thick water distribution pad shall be optionally available to ensure even water distribution over the top of the media. It shall be constructed of the same material as that of the evaporative cooling and humidification media. A synthetic coating shall be applied to the top and bottom edges of the distribution pad in order to reduce water erosion and aid in cleaning.

As required, the media shall include a synthetic coating applied to the air entering side of the pad. It shall have a depth of approximately one-half inch.

The manufacturer shall supply a one (1) year warranty that the media will be free from defects in materials and workmanship commencing from the date of shipment. This is provided that the media is installed and maintained according to the manufacturer’s written instructions. This includes but is not limited to algae control, water chemistry, and proper installation.

Media manufactured from random pattern materials such as aspen wood, horse hair, glass wool, or other synthetic materials shall not be accepted.

Cel Pad Specs

 GLAS PAD SPECIFICATIONS

Nature Cool™ Glas-Pad Specifications

The media shall be glass fiber evaporative cooling and humidification media, as provided by Nature Cool™ and shall be corrugated with a 5mm or 7mm flute height as per product type, in a cross-fluted configuration to ensure a self cleaning operation. Media shall be constructed from a self-supporting, impregnated 50 gram basis weight glass fiber substrate, to give high absorbency and protection against the degradation effects of water and air. The media shall be engineered to assure even air flow through flutes arranged at 15, 45 or a combination angle thereof to horizontal. The cross-fluted design shall be both self cleaning and prevent biological and clogging degradation.

The saturation effectiveness and media depth available shall be in accordance with what is listed on the appropriate performance curve.

A 1”- 3” thick water distribution pad shall be optionally available to ensure even water distribution over the top of the media. It shall be constructed of the same material as that of the evaporative cooling and humidification media. A synthetic coating shall be applied to the top and bottom edges of the distribution pad in order to reduce water erosion and aid in cleaning.

As required, the media shall include a synthetic coating applied to the air entering side of the pad. It shall have a depth of approximately one-half inch.

The supplier shall supply a two (2) year warranty that the media will be free from defects in materials and workmanship commencing from the date of shipment. This is provided that the media is installed and maintained according to the manufacturer’s written instructions. This includes but is not limited to algae control, water chemistry, and proper installation.

Media manufactured from random pattern materials such as aspen wood, horse hair, glass wool, or other synthetic materials shall not be accepted.

Glas Pad Specs

NatureCool

desiccant dehumidification
passive dehumidification
energy recovery
evaporative cooling
recore

Your One Source For Rotary Heat, Mass Transfer & Evaporative Cooling Products

 CEL PAD SPECIFICATIONS

Nature Cool™ Cel-Pad Specifications

The media shall be cellulose evaporative cooling and humidification media, as provided by Nature Cool™ and shall be corrugated with a 5mm or 7mm flute height as per product type, in a cross-fluted configuration to ensure a self cleaning operation. Media shall be constructed from a self-supporting, impregnated 100 gram basis weight cellulose substrate, to give high absorbency and protection against the degradation effects of water and air. The media shall be engineered to assure even air flow through flutes arranged at 15, 45 or a combination angle thereof to horizontal. The cross-fluted design shall be both self cleaning and prevent biological and clogging degradation.

The saturation effectiveness and media depth available shall be in accordance with what is listed on the appropriate performance curve.

A 1” - 3” thick water distribution pad shall be optionally available to ensure even water distribution over the top of the media. It shall be constructed of the same material as that of the evaporative cooling and humidification media. A synthetic coating shall be applied to the top and bottom edges of the distribution pad in order to reduce water erosion and aid in cleaning.

As required, the media shall include a synthetic coating applied to the air entering side of the pad. It shall have a depth of approximately one-half inch.

The manufacture shall supply a one (1) year warranty that the media will be free from defects in materials and workmanship commencing from the date of shipment. This is provided that the media is installed and maintained according to the manufacturer’s written instructions. This includes but is not limited to algae control, water chemistry, and proper installation.

Media manufactured from random pattern materials such as aspen wood, horse hair, glass wool, or other synthetic materials shall not be accepted.

Cel Pad Specs
 GLAS PAD SPECIFICATIONS

Nature Cool™ Glas-Pad Specifications

The media shall be glass fiber evaporative cooling and humidification media, as provided by Nature Cool™ and shall be corrugated with a 5mm or 7mm flute height as per product type, in a cross-fluted configuration to ensure a self cleaning operation. Media shall be constructed from a self-supporting, impregnated 50 gram basis weight glass fiber substrate, to give high absorbency and protection against the degradation effects of water and air. The media shall be engineered to assure even air flow through flutes arranged at 15, 45 or a combination angle thereof to horizontal. The cross-fluted design shall be both self cleaning and prevent biological and clogging degradation.

The saturation effectiveness and media depth available shall be in accordance with what is listed on the appropriate performance curve.

A 1”- 3” thick water distribution pad shall be optionally available to ensure even water distribution over the top of the media. It shall be constructed of the same material as that of the evaporative cooling and humidification media. A synthetic coating shall be applied to the top and bottom edges of the distribution pad in order to reduce water erosion and aid in cleaning.

As required, the media shall include a synthetic coating applied to the air entering side of the pad. It shall have a depth of approximately one-half inch.

The supplier shall supply a two (2) year warranty that the media will be free from defects in materials and workmanship commencing from the date of shipment. This is provided that the media is installed and maintained according to the manufacturer’s written instructions. This includes but is not limited to algae control, water chemistry, and proper installation.

Media manufactured from random pattern materials such as aspen wood, horse hair, glass wool, or other synthetic materials shall not be accepted.

Glas Pad Specs

NatureCool

javascript hit counter